|
The submitted paper
should be written in MS Word document.
The manuscripts must be prepared in double column format on A4 (210mm x 297mm or 8.3'' x 11.7'') paper size.
The issue of the journal will be compiled from printed camera-ready manuscripts based on received files e-mailed to the Secretary.
Minimum five (5) and maximum
ten (10) pages are allowed for each paper including
paper title, author(s) (name, affiliation and e-mail), Abstract, Keywords, Introduction, text, figures, tables,
Conclusions, Appendices, Nomenclatures, Acknowledgments, References and Biographies.
Manage number of the pages by adding more theoretic,
application, simulation and description parts as well as tables
and figures.
The margins on each A4 page must be as follows:
top and bottom = 2.5 cm, left and right = 2 cm.
The width of each column and the column separation must be 8.2 and 0.6 cm, respectively.
The paragraphs begin
at one TAB of 0.5 cm.
The first page of the manuscript must contain the title of the paper, author's name(s), affiliation(s),
and e-mail(s) all centered on the top of the page and spanning both columns. The top margin for the title on the first page should be 5 cm. There must be one
blank line (10pt) separations between the paper title, the author name(s)
and the author affiliation(s). The author e-mail comes after affiliation
in same row or next row. Two blank lines (10pt) separation are required between the author affiliation(s)/e-mail(s) and starting point of the main text.
The affiliation of all
of
the authors should be included with the
name of department and/or faculty, university or organization or
company, city and country, and email.
Each author's name(s)
is referred to its affiliation(s) with its end superscript number. The author(s) number is inserted in the beginning of each related affiliation(s).
The
author's names are
separated each other with five (5) spaces not using commas (,).
The authors and biographies priority list should be matched
together.
Please use Times New Roman font and single-space typing. Hand written symbols, tables, figures and equations are not acceptable.
The font sizes should be as follows:
|
Title |
14 bold
|
|
Author(s)
|
12 bold
|
|
Affiliation(s)
|
10 italic
|
|
E-mail(s)
|
10 italic
|
|
Abstract
|
10
|
|
Keywords
|
10
|
|
Headings
|
10 bold
|
|
Main text
|
10 |
|
Table(s)/Figure(s) title and body |
8
|
|
Subscripts/Superscripts
(Equation)
|
7 |
|
Sub-Subscripts/Superscripts
(Equation) |
5 |
|
Symbol (Equation)
|
15 |
|
Sub-Symbol (Equation)
|
10 |
Paper title must be typed in bold capital letters and centered on top of the first page.
All text bodies must be
typed in 10pt and justified from both sides.
Each section headings must be typed in bold
whole capital letters and centered on the respective columns which include numbering
(1, 2, 3, ...) at the first
starting from Introduction.
The numbering of
section headings
should be written to 1, 2, 3,
...
instead of
Roman
system (I,
II,
III,
IV, ...).
Abstract and Keywords
are not included with numbers. Abstract letter before a dash (Abstract-)
will be typed in bold and its text body is not bolded. Keywords letter
before a colon (Keywords:) will be typed in bold and its text body is
not bolded.
Address to all the references in Introduction and also other
required sections.
The sub-sections will
be written in bold and first capital letters with align text to left
(left aligned) and
included numbering (1, 2, 3, ...) after one blank line (10pt) directly from past
paragraph.
The numbering of sub-sections
should be written to 1, 2, 3,
...
instead of alphabetical system (A,
B, C, D, ...).
Improve typing errors and English language used in the
paper.
The table titles and figure comments should be written
centered at the top of the tables and the bottom of the figures, respectively.
Other phrases instead of Table and Figure should not be used in main
text and also table titles and figure comments.
The tables, figures, equations and references should consecutively beginning with 1. Only the equation numbers should be in the parentheses such as (1). Only the references numbers should be in the brackets such as [1].
The tables should be simple design, no highlighted and black color
with border width of 0.5 pt.
Improve and retype the tables'
contents. Tables in graphical status
are not acceptable.
Improve the figures resolution in high quality mode. The figures
with weak resolutions are not acceptable.
All the figures and photos of the author(s) should be included
in the original with high quality and resolution (High
Fidelity)
of the contents.
Follow the following instructions 1-3 to get high quality
figures:
1.
Change the
picture(s)
resolution
Click File
->
Options
->
Advanced
Select:
Image Size and Quality
Default Resolution: High Fidelity
OK
2. Check out the picture(s) resolution
Click Picture Format -> Compress Pictures
Resolution:
High Fidelity
3.
If the picture(s) resolution
is not
High Fidelity
then
CHANGE
it with high quality images.
- Just redraw the figures using the MS Word graphical
tools to include the origin and high quality graphs in
the paper.
- Redraw the Flowcharts and related
Figure(s) using the MS WORD
SHAPES
tool (Insert >> Shapes and then Group
all of the shapes) to improve the quality of the image.
- Redraw the Charts and related Figure(s)
using the MS WORD
CHART
tool (Insert >> Chart) or
DRAWING
tool (Drawing Tools) to improve the quality of the
image.
- Expand details and discussions of the paper in the Engineering
Case Studies.
- Add more notes in discussions and extend the results based on
the output figures, tables and outcome results.
- Compare the results and simulation outputs related to
different close methods and verify the advantages and
disadvantages.
Type the text in the figures. The hand written text, parameters and
numbers in the figures are not acceptable.
Some of examples for correctly writing figures, tables,
equations and references in the papers are as the following:
... Figure 1
...
Figures 2, 3 and 4
...
Figures 2-4
...
... Table 1
...
Tables 2, 3 and 4 ... Tables 2-4
...
...
Equation (1)
...
Equations (2), (3) and (4)
...
Equations (2-4)
...
Equations (2, 3 and 4)
...
...
Reference [1]
...
References [2], [3] and [4]
...
References [2-4]
...
References [2, 3 and 4]
...
The tables, figures, equations and references should consecutively beginning with 1. Only the equation numbers should be in the parentheses such as (1). Only the references numbers should be in the brackets such as [1].
Use the complete phrases of Equation, Figure and Table instead of Eq.,
Fig. and Tab. words.
Address all the used equations from the related original references.
Do not type the equations and parameters in MS WORD Equation Tools
with Cambria Math font. Only use the MathType Equation Editor with
Times New Roman font.
Define all of the parameters in the equations after their
using "where" phrase OR in the Nomenclatures part in the end
of the paper.
The tables should be simple design, no highlighted and no bolded
with border width of 0.5 pt.
Appendices,
Nomenclatures, Acknowledgments, References and Biographies of the author(s) (with
the author's photo) at the end of the paper are with no numerals.
Appendices, Nomenclatures and
Acknowledgments are also free
for using in the paper.
Rearrange and complete the References according to ICTPE
Conference
format as Name (first word) Family,
...,
"Paper or Book Title",
Proceeding or Journal or Publication, Issue
..., Vol.
..., No.
..., pp.
...-..., Place, City, Country, Date/Year, web address
all in regular font (no italic) and Times New Roman 10 pt.
(WITHOUT DOI).
Example:
[1] A.B. Cdef, G. Hijk, L.M Nopqr,
"The Title of the Paper or Book or Thesis or Report", Conference of Abcd, Journal of Efgh, Issue 1, Vol. 2, No. 3,
pp. 4-10, City, Country, April 2021.
Use and address at least two references in your paper from the
previous accepted papers in IJTPE journal issues published in the
address
www.iotpe.com/ijtpe.html
.
Use new and updated references and address them in the body text.
BIOGRAPHIES
-
Include the photo(s) of the author(s) with high quality and
color based in the Biographies section. The photos should be in
high resolution, color status and size of 2.5 cm x 2 cm. Taken
in full-face view directly facing the camera.
-
Improve
the poor quality of the author(s)’ photo(s) using IMAGE ENHANCER
tools/services.
Resolution: High
Fidelity
- Fill in the items of the following form for all of the
authors separately at the end of the
paper.
Name: Name of the author
Middle
Name:
Middle Name of the author (if exists)
Surname:
Surname of the author
Birthday:
dd.mm.yyyy
Birthplace:
City, Country
Bachelor:
Field/Title, Department, Faculty, University/Institute, City,
Country, Year of Graduation
Master:
Field/Title, Department, Faculty, University/Institute, City,
Country, Year of Graduation
Doctorate:
Field/Title, Department, Faculty,
University/Institute, City, Country, Year of Graduation
The
Last Scientific Position:
Academic/Prof./Assoc. Prof./Assist.
Prof./Lecturer, Department, Faculty, University/Institute, City,
Country, Since Year
Research Interests:
Field 1, Field 2, Field 3
Scientific Publications: ? Papers, ? Books, ? Patents, ?
Projects, ? Theses
Scientific Memberships:
Organization 1, Organization 2, Organization 3
The end of the columns of the
last page is adjusted in the same rows.
Select one Conference Topic for your submitted paper from the
following link
and put it in the end of the paper:
e.g.:
I. Power and
Energy Systems (01PES)
Please download
the journal template
Format of Papers (DOC)
in
Microsoft Word
DOC
as the final
published format to prepare your camera ready paper(s).
Please download
the journal template
Presentation of Papers (PPT)
in
Microsoft
PowerPoint PPT
as the presentation format
to present your camera ready paper(s).
|
